Fire Safety on Building Sites

Building environments, especially those in a transitional phase, introduce specific fire hazards due to frequent layout changes, relocatable equipment, and divided workforces. A sound alerting system is necessary for notifying workers without delay. The Howler range, including the radio-based GOLink system, HO units, and site alert models, provides a tailored safety setup to match various site demands.

A Look at HO Alarms

HO alarms are independent, battery-operated units used where traditional systems are not viable. Ideal for moveable cabins or outbuildings, they require no wiring.

• High sound output: Around 102 dB at a metre’s distance.


• Optional strobe: Some models include integrated lights for visibility.


• IP-rated: Many are suited for external mounting or partially exposed areas.

These alarms provide supplementary coverage where the main alert network may not reach.

The Site-Wide Alert Range

Suitable for mid-sized projects, the Site Alert system operates individually or in linked setups of up to 20 units using a simple two-core cable. When triggered, all devices in the series respond simultaneously.

• Approx. 100 dB sound level at 1 metre


• Built-in flashing beacon for loud or noisy settings


• Recommended where cabling is straightforward

Going Wireless: Site Alert RF

Where cable routes aren't howler site fire alarms possible, Site Alert RF links up to 30 units over wireless. It has an open-area range of around 1 km and supports multiple frequencies for interference avoidance.

Blending wireless and cabled systems is commonly the best choice for sites with varying structures.

Integrating the GOLink System

The GOLink system acts as a coordinating hub for large, multi-zone installations, using wireless signals to connect multiple devices.

Connecting to Site Systems

Through the Interface Unit, it’s possible to link turnstiles, autodiallers, howler ho alarms CCTV, and other site safety components. Up to 127 points can connect across a site-wide network.

First Aid Callouts

Certain models (e.g. H05 GOLink) include a first aid button alongside the fire alert. The first aid signal quietly notifies the control team, allowing medical needs to be flagged without general evacuation.

Deployment Guidelines

• Zone assessment: Identify where alarms need to be noticeable, dividing the site into manageable sectors.


• Choose connection types wisely: Use hard-wired alarms where feasible, supplementing with RF in distant or pop-up areas.


• Set a maintenance routine: Schedule regular testing and check battery levels.


• Training & signage: Ensure directions are posted and team members know how to respond to alerts.

FAQs

How many devices can be wired together?

Up to 20 Site Alert units can be connected using 2-core cable.

What’s the wireless range of Site Alert RF?

Approx. 1 km in open-air conditions, though physical obstructions can reduce range.

Do HO alarms need a base station?

No, HO models are self-sufficient and do not require central control.

Can GOLink interface with other site systems?

Yes, external systems can be connected via the GOLink Interface Unit.

Purpose of switch protection?

It reduces false alarms by sounding a warning if tampered with before activation.

Can both cabled and RF alarms work together?

Yes, the GOLink system allows wired and wireless units to operate on the same network.

Does first aid signal cause evacuation?

No. It sends a targeted alert to designated receivers without activating evacuation systems—unless configured otherwise.

Wrap-up

Whether your project involves one zone or several, Howler alarms—HO, GOLink, and Site Alert—offer solutions that adapt to varying conditions. For product information, planning tools or live demos, visit the Howler section on FireSense.